1. Natural ventilation in the factory
Natural ventilation is a system that operates entirely based on weather factors, taking fresh natural air from the outside in to create air exchange from the inside and pushing the heat inside out, through factors such as excess heat, natural wind rich in O2, ... to help air circulate naturally.
Working principle: Hot air in the space goes up and cool air outside goes in, replacing each other. However, the design and layout of this solution requires quite a bit of understanding and expertise, so that the wind path is adjusted in the right direction with the amount of wind going in and out appropriate for each type of construction.
Common natural ventilation solutions: Ventilation windows, skylights, roof ventilation balls, etc.
The advantages are: Improved indoor air quality; No energy consumption; Limiting environmental pollution emissions; Protecting human health; Easy operation and maintenance of factory cooling systems.
The disadvantages are: The efficiency is not high, especially during the peak summer months; There are many issues that investors cannot control such as weather, wind flow, wind direction, etc.
2. Industrial (Artificial) air ducts in factories
Industrial ventilation pipes are a very necessary ventilation method for large-scale projects such as factories, manufacturing plants, commercial centers and large buildings, etc. Using natural ventilation may not be enough to meet the wind volume for such spaces, so the industrial cooling ventilation system will solve it for you.
Industrial ventilation can be understood as a mechanical ventilation system, using supporting equipment such as ventilation fans, air ducts, new technology cooling pads, etc. to ventilate and cool the factory in the most effective way.
Working principle: When the system is operating, it creates a negative pressure difference, and fresh air from the outside automatically flows inside to replace the air released outside. At the same time, the continuous cooling of the surface will reduce the hot air entering. Therefore, the system always provides a source of clean, cool, natural air that is friendly to the environment inside.
.jpg)
The advantages are: Smooth operation, no noise and no power loss; Large ventilation capacity so air circulates well, reducing humidity to the required level; The system is made of durable, rust-proof materials so it has a long life, good quality and long-term use; Always ensure adequate air supply, eliminate toxic substances, maintain health and increase work efficiency for workers.
The disadvantages are: High installation, operation and maintenance costs. Because of the use of equipment such as exhaust fans, pipes, etc., the system must be continuously cleaned and maintained to ensure stable operation. When installing, there must be a professional consulting, design and construction unit.
Above are the 2 most optimal ventilation measures currently for industrial projects, including building ventilation systems. In addition, there are other ventilation channels that are also quite effective for each individual project.
With extensive experience, over 15 years of operation in the field of air duct manufacturing, since then the joint stock company Sao Viet Air Conditioning Technology Produces quality galvanized steel duct products manufactured with advanced technology to fully meet the increasingly diverse needs of customers.
If you are interested in industrial ventilation pipes, please contact Hotline: Mrs. Hang 0985 239 838, Mrs. Giang: 0934 559 168 so that Sao Viet can advise you on the products most suitable for your project!
