1. Technical standards for duct system installation:
The duct system helps ensure the circulation and movement of air in a fixed space to provide a high-quality air source for the living environment in that space.
For areas with closed spaces, air circulation is often much more difficult, so installing this ventilation system makes air exchange easier.
The duct system combined with industrial ventilation fans from the vents helps clean the air to avoid causing stuffiness, increasing the risk of respiratory diseases.
See also: The role of air ducts in air conditioning
2. Structure of the duct system:
- A suction head to capture pollutants at the source
- Ducts for air transport
- An air cleaning device to remove or reduce contaminants.
- Ventilation fan to move air through the system.
- An exhaust pipe to remove polluted air.
3. Standard duct installation process
About the process ventilation duct installation The standard currently in use includes the following steps:
Step 1: Field survey
This is an extremely important and indispensable step in the process. ventilation pipe installation. The actual survey here includes a survey of the location to be installed, the systems surrounding the pipe to avoid affecting electrical lines, water lines, etc.
The survey also helps the pipeline design units have a direct view, choose the type of materials and how to construct the duct shaft appropriately.
Step 2: Design drawings
Design detailed drawings of the overall system installation. The more accurate, detailed and specific the drawings are, the faster and more efficient the implementation process will be.
Step 3: Choose construction materials
Based on the drawing and agreement on the piping system to be installed, you prepare the necessary materials during the construction process such as air ducts, air vent, support tools, ...
It is best to prepare extra products, so that if there is a problem during construction, there will be replacement materials immediately, without affecting the progress of the project.
Step 4: Proceed with duct installation
Install ventilation pipes in accordance with technical and aesthetic requirements in the drawings. In addition, it is also necessary to ensure safety during construction.
Step 5: Check and accept the quality of duct installation
After completion, check the system carefully and run a test to confirm the quality of the pipeline.
If you use the ventilation pipe installation service of a professional company, you need to pay more attention to the warranty policy for the system. Regular inspection and maintenance will ensure maximum pipe performance.
4. Important issues to note when installing air ducts:
There are three basic issues that you need to consider when installing ventilation pipes. These are:
- Consider the location and performance of the duct system to be installed.
The location of the ventilation duct has a direct impact on the performance of the system.
Ideally, you should avoid installing the pipe in a place with a lot of traffic or at head level. Because when the air pressure is high, it can affect your health. The ideal location for installing the pipe is higher than head level and in a place with little traffic.
All details in the pipeline must be installed according to the drawings and technical standards. The joints must be tight and secure, creating a sealed pipeline that does not allow air to escape, reducing operating efficiency.
- Choose the right pipe for the purpose and installation environment.
When installing ductwork, you need to consider the actual environmental conditions of the installation.
For example, if the ventilation duct is installed in a cool place, an industrial ventilation system can be used. But if it is installed in a place with high temperatures, a negative pressure cooling ventilation system should be selected to help regulate the temperature inside the building.
- Choose a reputable duct installation contractor
You should choose a reputable, professional unit, which will have good quality products for the project.
As a pioneer in the industry air duct in Hai PhongSao Viet Air Duct with 15 years of experience, is proud to be the place where customers choose to entrust their gold, choose a business, and send their projects.
Sao Viet Air Duct Always ready, respecting each order of our customers, we always keep in mind that all opinions and feedback from customers and partners are valuable resources for us to perfect our products better, more carefully, to meet the increasing demands of the market.
When choosing Sao Viet Air Duct, you can be completely assured about the product. With stable and consistent product quality, certified to meet standards, ready to meet all strict criteria of the projects.
As one of the experienced units, having cooperated with many companies and large projects, Sao Viet Air Duct is confident that it can satisfy customers.
Sao Viet Air Duct Hope to accompany you in building sustainable projects.
For detailed advice and quotes on each product, please contact us using the information below for the most thoughtful and detailed advice.
SAO VIET AIR DUCT MANUFACTURING AND TRADING COMPANY LIMITED
Address: 267 Le Thanh Tong, May Chai, Ngo Quyen, Hai Phong
Hotline: Mrs. Hang 0985239838, Mrs. Giang: 0934559168
Tel: 02253555619
Website: www.dieuhoasaoviet.vn
