![\"\"](\"https:\/\/onggiosaoviet.vn\/wp-content\/uploads\/2026\/07\/Anh-1-Bai-11-1536x1152-1-1024x768.png\")
<\/figure>\n\n\n\n2. 7 areas contractors should check<\/h2>\n\n\n\nInspection location<\/strong><\/th>Common risks<\/strong><\/th>Content to be checked<\/strong><\/th><\/tr><\/thead>Pipe joint<\/td> Slit<\/td> Check the entire perimeter.<\/td><\/tr> Bich<\/td> Crooked, bent<\/td> Check for uniformity<\/td><\/tr> Wall corner<\/td> Corner gap<\/td> Check the link<\/td><\/tr> Go, turn, move<\/td> Incorrect size<\/td> Compare with the drawings.<\/td><\/tr> Connecting the device<\/td> Loose joint<\/td> Check the contact point.<\/td><\/tr> Visitor Gate<\/td> Untight<\/td> Check the opening and closing mechanism.<\/td><\/tr> Through walls\/floors<\/td> Open around<\/td> Complete check<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n3. Precision machining helps reduce risk from the outset.<\/h2>\n\n\n\n
This is why contractors should not evaluate suppliers based solely on unit price.<\/p>\n\n\n\n
A professional outsourcing unit needs to control both simultaneously:<\/p>\n\n\n\n
\n- Size.<\/li>\n\n\n\n
- Squareness.<\/li>\n\n\n\n
- Flatness.<\/li>\n\n\n\n
- Position of the flange.<\/li>\n\n\n\n
- Accessory dimensions.<\/li>\n\n\n\n
- Joint specifications.<\/li>\n\n\n\n
- Product condition before shipment.<\/li>\n<\/ul>\n\n\n\n
Sao Viet Air Duct<\/strong> The aim is to control the product from the initial drawing acceptance to manufacturing and delivery, thereby helping contractors minimize the need for on-site modifications.<\/p>\n\n\n\n4. Defects should not only be discovered during acceptance testing.<\/h2>\n\n\n\n
If we wait until the acceptance testing phase to inspect the entire system, the repair costs could increase significantly.<\/p>\n\n\n\n
The contractor should conduct inspections in stages:<\/p>\n\n\n\n
Processing \u2192 In-factory QC \u2192 Delivery \u2192 Installation \u2192 Final inspection \u2192 Acceptance testing.<\/strong><\/p>\n\n\n\nConclusion<\/h2>\n\n\n\n
The airtightness of a duct system is the result of a whole chain from design and fabrication to installation. The selection Sao Viet air duct<\/strong> We should not only look at the final product but also at the ability to coordinate with the contractor throughout the project execution.<\/p>\n\n\n\nContact information<\/h3>\n\n\n\n
SAO VIET AIR DUCT MANUFACTURING AND TRADING COMPANY LIMITED<\/strong><\/p>\n\n\n\n
Inspection location<\/strong><\/th>| Common risks<\/strong><\/th> | Content to be checked<\/strong><\/th><\/tr><\/thead> | Pipe joint<\/td> | Slit<\/td> | Check the entire perimeter.<\/td><\/tr> | Bich<\/td> | Crooked, bent<\/td> | Check for uniformity<\/td><\/tr> | Wall corner<\/td> | Corner gap<\/td> | Check the link<\/td><\/tr> | Go, turn, move<\/td> | Incorrect size<\/td> | Compare with the drawings.<\/td><\/tr> | Connecting the device<\/td> | Loose joint<\/td> | Check the contact point.<\/td><\/tr> | Visitor Gate<\/td> | Untight<\/td> | Check the opening and closing mechanism.<\/td><\/tr> | Through walls\/floors<\/td> | Open around<\/td> | Complete check<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n | 3. Precision machining helps reduce risk from the outset.<\/h2>\n\n\n\nThis is why contractors should not evaluate suppliers based solely on unit price.<\/p>\n\n\n\n A professional outsourcing unit needs to control both simultaneously:<\/p>\n\n\n\n
|
|---|
![\"\"](\"https:\/\/onggiosaoviet.vn\/wp-content\/uploads\/2026\/07\/Anh-1-Bai-11-1536x1152-1.png\")
<\/figure>","protected":false},"excerpt":{"rendered":"