Duct supports and suspension rods: Principles of placement during construction.

Van gió vuông và phụ kiện điều chỉnh cho hệ thống thông gió

This summary outlines key considerations when arranging supports, suspension rods, and connections for duct systems, facilitating coordinated construction and inspection according to design specifications.

The support and suspension system plays a crucial role in stabilizing the ductwork throughout its operation. Improper placement can cause sagging, misalignment, or create unwanted loads on the connection points. Therefore, the support system must be shown and checked in conjunction with the HVAC drawings, structural design, and actual site conditions.

1. Why is it necessary to calculate the suspension and support methods?

Ducts, fittings, and accompanying components create loads acting on the suspension system. The spacing between support points, load concentration locations, and ground conditions must be determined according to the design. The number or location of supports should not be changed without first assessing the impact.

2. Common components

Depending on the project's structure, the suspension system may include threaded rods, support bars, brackets, plates, bolts, and connecting components to the structure. The materials, dimensions, and installation method must be suitable for the operating environment, load, and approved technical requirements.

3. Coordinate with other MEP systems

Air ducts are often routed alongside cable trays, water pipes, sprinklers, and ceiling fixtures. Before construction, it is necessary to review the elevation, maintenance distances, and anchor points. Avoid drilling or connecting to structures without prior authorization according to construction procedures.

4. Inspection after installation

The tightness of the connections, the condition of the suspension rods, the support positions, the straightness of the alignment, and any signs of deformation should be checked. If vibration, sagging, or collision with other systems is detected, the technical department should be notified for assessment and handling according to the records.

Summary table

Location/CategoryContent of reviewNote
Car suspensionType, length, connectionAccording to the design and confirmed load
Support bar/rackSize, position, stabilityDo not alter the structure without permission.
Anchor pointLocation of connection to the structureComply with construction regulations.
pipelineStraightness, deflection, distanceCheck after tube placement.
MEP intersectionElevation and maintenance clearanceCoordinate before fixing.

Conclusion

The support and suspension rods for air ducts need to be considered in conjunction with the design documents, construction conditions, and acceptance requirements of each project. Agreeing on information from the outset helps contractors control quality, minimize issues, and facilitate more effective coordination between all parties.

Contact Sao Viet Air Ducting

Sao Viet Air Ducting accepts requests for fabrication of air ducts and accessories according to project drawings and technical documents. M&E contractors can submit drawings or Bill of Quantities (BOQ) to discuss the scope of supply and necessary confirmation information.

SAO VIET AIR DUCT MANUFACTURING AND TRADING COMPANY LIMITED

Address: 267 Le Thanh Tong, May Chai, Hai Phong

Hanoi Representative Office: No. 19, Lane 24, Kim Dong Street, Giap Bat Ward, Hoang Mai District, Hanoi

Hotline: 0815.999.826 – 0934.559.168 | Technical support: 0949.852.886

Email: vietonggio@gmail.com

same topic