
Learn about the characteristics and applications of flexible air ducts, and considerations regarding length, bending radius, connections, and maintenance in HVAC systems.
Flexible ducting is commonly used for connections requiring flexibility between the main ductwork and air vents or equipment. Thanks to its ability to bend to fit the space, this type of ducting helps in locations where rigid ducting is difficult to install. However, improper use or haphazard installation can increase resistance and affect the designed airflow.
1. Characteristics and scope of use
Flexible air ducts have a versatile construction, which may include a layer of air-conducting material and an insulation layer depending on the type. They are often considered for short connections, locations requiring directional adjustments, or areas connecting to air vents. Their use must conform to design specifications and manufacturer documentation.
2. Why shouldn't you stretch or bend hair arbitrarily?
Excessively long, flattened, or sharply bent ductwork can alter the effective cross-section and increase airflow resistance. This can result in lower-than-desired airflow at the air inlet. Therefore, the appropriate length and path should be determined during the design phase.
3. Connect and secure properly.
Both ends of the pipe must be securely connected to compatible fittings or accessories. When securing, avoid tearing the outer layer, distorting the pipe body, or creating unnecessary sagging. Clamping, sealing tape, and related accessories must be suitable for the type of pipe being used.
4. In-operation inspection
When inspecting the system, pay attention to tears, loose connectors, collapsed pipes, or objects pressing on the pipes. If abnormal flow is detected, check the entire rigid ductwork, valves, and air vents instead of concluding the cause lies solely in the flexible ductwork.
Summary table
| Checkpoint | Request for review | Problems to avoid |
| Length | According to the product drawings and instructions. | Arbitrarily extending multiple sections |
| Way | The bends properly, without being compressed. | Fold or flatten |
| Connector | Secure and firmly fasten | Loose, detached, or misaligned neck connector |
| Bracket | Support according to technical instructions. | Hammocked or compressed by another system |
| Status | No tears, punctures, or deflation. | Damage went undetected. |
Conclusion
Flexible ducting in ventilation systems needs to be considered in conjunction with the design documents, construction conditions, and acceptance requirements of each project. Agreeing on information from the outset helps contractors control quality, minimize issues, and facilitate more effective coordination between all parties.
Contact Sao Viet Air Ducting
Sao Viet Air Ducting accepts requests for fabrication of air ducts and accessories according to project drawings and technical documents. M&E contractors can submit drawings or Bill of Quantities (BOQ) to discuss the scope of supply and necessary confirmation information.
SAO VIET AIR DUCT MANUFACTURING AND TRADING COMPANY LIMITED
Address: 267 Le Thanh Tong, May Chai, Hai Phong
Hanoi Representative Office: No. 19, Lane 24, Kim Dong Street, Giap Bat Ward, Hoang Mai District, Hanoi
Hotline: 0815.999.826 – 0934.559.168 | Technical support: 0949.852.886
Email: vietonggio@gmail.com


