Square ducting vs. spiral round ducting: Which one should you choose?

Both square and spiral round ducts are used in ventilation and air conditioning systems. Each type has its own structural characteristics and application conditions. The selection should not be based solely on appearance or cost, but should also consider airflow, installation space, route layout, and design specifications.

1. Characteristics of square air ducts

Square ductwork is often considered in areas with height restrictions or where ductwork needs to be routed close to structures, ceilings, and other technical systems. Rectangular shape offers flexibility in aspect ratios to suit different spaces. However, the dimensions, reinforcement structure, and suspension system must be checked according to design requirements.

2. Characteristics of spiral round ducting

Spiral round ducting has a circular cross-section and a spiral joint running along the duct body. This type of ducting is often suitable for routes with ample space for a circular cross-section, open ventilation systems, or buildings requiring an industrial design element. Connections typically require compatible adapters, elbows, tees, and connectors.

3. Factors that determine the choice

The design flow rate, velocity, height limits, technical clearances, aesthetic requirements, and maintenance plan need to be considered. For renovation projects, the existing beams, ceilings, and piping can significantly impact the selection process. Any changes from the original design must be approved by an authorized body.

4. You shouldn't choose based solely on price.

Cost needs to be considered along with the quantity of accessories, suspension methods, transportation, installation, and on-site coordination. An option with a low initial unit price but unsuitable for the space may result in additional accessories or modifications during construction.

Summary table

CriteriaSquare air ductSpiral round air duct
ShapeRectangular/square cross-sectionCircular cross-section
SpaceThe aspect ratio can be adjusted flexibly according to the design.A suitable space with the appropriate diameter is needed.
AccessorySquare elbows, cones, tees, flanges, and transition pieces.Round elbows, tees, cones, and round connectors
ApplicationTechnical wiring in the ceiling, height-restricted space.Open ventilation duct or suitable area with a circular cross-section.
Selection criteriaDrawings, flow rate, elevation, and structureDrawings, flow rate, diameter, and space.

Conclusion

Square and spiral round ductwork need to be considered in conjunction with the design documents, construction conditions, and acceptance requirements of each project. Agreeing on information from the outset helps contractors control quality, minimize issues, and facilitate more effective coordination between all parties.

Contact Sao Viet Air Ducting

Sao Viet Air Ducting accepts requests for fabrication of air ducts and accessories according to project drawings and technical documents. M&E contractors can submit drawings or Bill of Quantities (BOQ) to discuss the scope of supply and necessary confirmation information.

SAO VIET AIR DUCT MANUFACTURING AND TRADING COMPANY LIMITED

Address: 267 Le Thanh Tong, May Chai, Hai Phong

Hanoi Representative Office: No. 19, Lane 24, Kim Dong Street, Giap Bat Ward, Hoang Mai District, Hanoi

Hotline: 0815.999.826 – 0934.559.168 | Technical support: 0949.852.886

Email: vietonggio@gmail.com

same topic